$69,995.00
Updated 2024.Mar.27
Stage 4 Running Chassis Includes
Chassis
The Nerd Rods Stage 3 Chassis
- Fully Welded Nerd Rods Frame
- Corvette Suspension Front and Rear
- Dana 44 Upgrade
- 3.45 Gear Ratios
- Limited Slip Differential (Posi Trac)
- Disk Brakes
- Rack and Pinion Steering
- QA1 Coil Over Shocks
- Nerd Rods Ackerman Kit
- Stainless Steel Brake Line Kit
Drive Line
- LS 3 Connect and Cruise
- 430 HP LS3 Crate
- 4L65 4 Speed Automatic Transmission
- Torque converter
- Wiring, and electronics
- Driveline Only
- Vintage Air Front Runner Pulleys
- Starter
- Slip Yoke, and Drive Shaft
Exhaust
- Stainless Bros 2.5” Tubing
- True X Pipe
- Flowmaster Delta 50 Mufflers
- V Band Clamps
- Vibrant Performance Flex Couplers
- V Band Clamps
- Nerd Rods Billet Hangers
- Stainless Works Isolators
- Long Tube Headers, Coated Mild Steel
Cooling
- PRC Radiator Core System
- Core Support
- Radiator
- Transmission Cooler
- Power Steering Cooler
- Dual Fans
- Fan Shroud
- Recovery Tank
- Cap
- Upper and Lower Radiator Hose
- Steam Lines and Hardware
- Clamps, Coolant, and Fittings
Fuel System
- Nerd Rods Custom 32 Gallon Fuel tank
- 32 Gallons
- Aluminum
- 340 LPH Fuel Pump
- Sending Unit
- Mounting and Hardware
- Stainless Hardlines
- Aeromotive Regulator
- Fragolia Flex Lines
- AN Fittings and LS Adapter
Power Steering Lines
- AN Power Steering Specific Hoses
- AN Fittings
- Return Hose
- Power Steering Cooler
- Corvette Rack Adapters
Steering Linkage
- Nerd Rods Steering Linkage Kit
- Corvette Spline U Joint
- Center U Joint
- Mock Up Shaft
- DOM Steering Linkage
Other Items
- Air Filter
- MAF Sensor Adapter
- Optima Battery, Yellow Top
- Temporary Start Wiring
- Trunk Mount Battery Cables
- Fired up, leak checked, and running
Wheel and Tire Sizes
1988-1996 Suspension with no body modifications
- Front
- 17” minimum wheel diameter
- 9.5” wide wheel with 7” of back spacing or (+56mm offset)
- 255/xx/Rxx Front, 10” wide, Tires
- Rear
- 16” minimum wheel diameter
- 10.5” wide wheel
- 275/xx/Rxx Front, 11.25” wide, Tires
1988-1996 Suspension with Fender and Rear Tub Modifications and TFC4-HLK Handling Kit
- Front
- 17” minimum wheel diameter
- 10.5” wide wheel with 8” of back spacing or (+56mm offset)
- 275/xx/Rxx Front, 11.2” wide, Tires
- Rear
- 16” minimum wheel diameter
- 11” wide wheel
- 315/xx/Rxx Front, 12.13” wide, Tires
